A field reference for recognizing, documenting, and evaluating loss of bond in installed flooring.
Adhesion Loss is a condition in which the bond between a flooring product, adhesive, and substrate becomes weakened, compromised, or lost, resulting in partial or complete separation of the flooring from the substrate.
Some installations may appear normal while significant bond loss exists beneath the surface.
Isolated bond loss with little effect on serviceability.
Noticeable movement, hollow sounds, and multiple affected areas.
Extensive bond loss with widespread movement and corrective action typically required.
Adhesion loss develops when the bond between the flooring, adhesive, and substrate becomes compromised. Multiple contributing factors are common.
Common contributing factors
Why It Happens
Moisture may soften, emulsify, or weaken the adhesive system and reduce bond strength.

Common contributing factors
Why It Happens
Improper installation may prevent a durable adhesive bond from developing.


Common contributing factors
Why It Happens
Contaminated or weak substrates may prevent adequate adhesion.

Common contributing factors
Why It Happens
Adhesive characteristics may reduce bond performance under service conditions.
The primary objective is to determine where the bond failed before determining why it failed.
Not necessarily.
Moisture, contamination, substrate preparation, installation practices, environmental influences, and adhesive characteristics should be evaluated before considering a manufacturing-related concern.
Misdiagnosis
All adhesion loss is caused by moisture.
Misdiagnosis
Hollow sounds automatically indicate adhesion loss.
Misdiagnosis
The adhesive failed, therefore it is defective.
When applicable
Adhesion Loss vs. Hollow Sounds: Hollow sounds may occur with or without bond loss.
Adhesion Loss vs. Delamination: Delamination is failure within the flooring product; adhesion loss occurs at or within the bonding system.
Adhesion Loss vs. Telegraphing: Telegraphing reflects substrate irregularities and does not by itself establish bond loss.
Determine the bond-loss interface first. The location of bond loss often provides more useful information than the presence of bond loss itself.







Adhesion Loss is a bonding condition in which the connection between the flooring, adhesive, and substrate becomes compromised. Determining causation requires identifying the bond-loss interface and evaluating moisture, substrate conditions, installation practices, adhesive characteristics, environmental influences, and all other contributing factors. No single observation should be relied upon to determine causation. Conclusions should be based upon the totality of the available evidence together with applicable manufacturer requirements and industry standards.